New Hdd !!hot!!: Installing

| Symptom | Likely Cause | Solution | |---------|--------------|----------| | Drive not detected in BIOS | Loose SATA/power cable, disabled SATA port | Re-seat cables, check BIOS SATA configuration (set to AHCI) | | Drive not in Disk Management | Not initialized, driver issue | Rescan disks in Disk Management, check Device Manager for unknown devices | | Cannot format to full capacity | Using MBR instead of GPT | Convert to GPT (Windows: mbr2gpt tool, or repartition) | | Clicking or grinding noise | Mechanical failure, insufficient power | Stop use immediately – backup if possible; replace drive | | Very slow transfer speeds | Drive connected to SATA2 port, or heavy fragmentation | Move to SATA3 port; for large files, use NTFS with proper cluster size |

: Touch a metal part of the case or use a grounded wrist strap to prevent electrostatic discharge (ESD) which can kill your hardware. 🏗️ Physical Installation (Desktop) Open the Case : Remove the side panel of your tower. installing new hdd

This comes directly from your Power Supply. It is a wide, flat connector. Plug this into the larger slot on the back of the HDD. It is "L-shaped," so it only fits one way. | Symptom | Likely Cause | Solution |