Danfoss Mct 10 License Key Jun 2026

Both versions utilize a standard USB-A to Type-B (printer) cable to connect your laptop to the drive's control card.

Common order codes include 136S0001 for a standard license or 130B1001 for multi-user (e.g., 5-license) bundles. danfoss mct 10 license key

| Location | What’s stored | Access method | |----------|---------------|----------------| | | Encrypted flag indicating “licensed” and a hash of the key + hardware ID. | Not user‑editable; the controller validates the flag each power‑up. | | On the PC (local license file) | A copy of the key used for offline activation. | Usually C:\Users\<User>\Danfoss\MCT10\license.dat . Deleting it does not affect the controller’s license, but you’ll need to re‑enter the key if you reinstall the software. | | Cloud/portal (account‑wide record) | Central record of which serial numbers have been assigned which keys. | Useful for audits, renewals, and support tickets. | Both versions utilize a standard USB-A to Type-B

| Symptom | Likely cause | Fix | |---------|--------------|-----| | | • Typo when entering the key. • Key meant for a different model (e.g., MCT‑5). | Re‑type carefully; verify the key matches the MCT‑10 model. | | “License already in use” | The key is bound to another controller’s serial number. | Check that you are using the correct serial number; contact Danfoss support with proof of purchase for re‑issuance. | | “Cannot contact licensing server” (offline) | No internet, firewall blocks the Danfoss validation URL. | Use the offline activation file provided with the purchase (usually a .lic file you import). | | License disappears after firmware update | Firmware reset cleared the stored flag. | Re‑apply the key after the update; the software will re‑validate against the same hardware ID. | | Expired trial key | Time‑based trial reached its limit. | Purchase a full‑version key or request an extension (some trial extensions are possible for evaluation partners). | | Not user‑editable; the controller validates the flag

If you have the dongle plugged in but the software isn't recognizing it:

| Aspect | Explanation | |--------|-------------| | | A string of characters (often alphanumeric) that uniquely authorises a particular MCT‑10 controller to run the full‑feature version of the Danfoss software. | | Binding | The key is typically bound to the controller’s serial number or hardware ID, so it cannot be reused on a different unit. | | Activation flow | 1. Install the MCT‑Software on a PC. 2. Connect the PC to the MCT‑10 via USB, Ethernet, or the Danfoss‑specific interface. 3. The software reads the controller’s ID and prompts you for a license key. 4. You enter the key; the software validates it against Danfoss’s licensing server (or offline checksum file). 5. Once validated, the controller is unlocked for the licensed features. | | Types of licenses | • Per‑device (single‑unit) – one key per controller. • Floating/Network – a central server holds a pool of seats that can be checked out by multiple controllers (rare for MCT‑10). • Time‑based trial – a temporary key for evaluation (usually 30‑days). |

The software is available for download on the Danfoss Service and Support portal.